Airhank learned that domestic LCD manufacturers use compressed air and high pressure air blower as air source for drying, whether imported or domestic back panel cleaning equipment. Often the total power of the gas source is more than 100kW, and the drying effect of the LCD metal backplane can only be barely used.

In a large domestic TV accessories manufacturer, the original drying cleaning production line, a total of 12 installed The 7.5kW high pressure air blower is equipped with 20 800mm long air knives. The drying effect is good or bad. The on-site operators have no consciousness of maintenance and install unreasonable filtering system. Sometimes the defective rate of metal back plate is increased due to air pollution, and the high-pressure fan is easy to be damaged. For this reason, Airhank provides a high speed air blower and blade system, which is equipped with three hank-100 11kw high speed air blower and 12 800mm Long Precision Air Knife. The drying effect of the back plate is significantly improved, and the high-precision filter is provided according to the site conditions, which can not only ensure the safe operation of the high speed air blower system, but also improve the cleanliness of the air source, effectively improve the product qualification rate and reduce the production cost.

Project analysis